Do you think you have a Doubled Die?

General discussion board about VAMs, but no buy/sell offers
Forum rules
All posts to this forum must abide by the posting rules. Continued posting to any VAMWorld forum constitutes acceptance of the rules.
Stlcoin
Posts: 50
Joined: Thu Apr 01, 2021 2:50 am

Re: Do you think you have a Doubled Die?

Post by Stlcoin » Sun Aug 22, 2021 4:19 am

madbirder wrote:
Mon Aug 16, 2021 7:21 pm
Stlcoin wrote:
Sun Aug 15, 2021 10:33 pm
madbirder wrote:
Sun Aug 15, 2021 5:20 pm
So my question is this. Are not both Machine and Die doubling both errors? Neither should appear on the coin correct? Die fatigue in the case of double ears is a case in point. Not all are doubled, some are die fatigue. As some have mentioned they probably should not have been listed. So why is one kind of doubling cherished and another discarded? or in the case of die fatigue some overlooked and lumped with doubled ears?
Technically, yes both MD, DDO, DDR are errors, the primary reason MD is not considered acceptable/considered worthy is due to the fact that MD happens in individual Machine Press set-up/operational & equipment malfunctions, whereas DDO/DDR's are physically manufactured into working dies by error and would be produced on any Press the dies are installed on. As for die fatigue, it is caused by overuse/failure to a specific working die and not recurrent to the hubbing process unlike DDO/DDR's. Also die fatigue usually happens on very high mintage <specifically, Lincoln Cents> and harder substrate coins <specifically Clad coinage & Jefferson Nickels>. Die Fatigue is not normally seen in Silver Issues either as the Silver is much softer, in those cases Die Fatigue is interchanged with Die Erosion and Typical Over Polishing of working dies.
Thanks, appreciate the insight. So I understand this right, DD is not repunched it's in the hub when they make the die. I went back and read the article but it was more about how to tell the difference.
Correct - Normally caused by mechanical misalignment{s} between Master Die & Working Dies. There are different classifications of this process as well such as Tilted Die Hubbing, etc. Misalignments can be created in all 3 axis'. Although most of the major Doubled Dies errors happen in a rotational axis. Repunching errors happen primarily with re-used Working Dies that are normally polished/repaired in a specific area <i.e- Date or Mint Mark> and then hand set punched into the Die. This is where Over Mint Marks, Offset MM, Misplaced MM/Dates, etc are created.

JackBnimble01
Posts: 268
Joined: Wed Jul 24, 2019 4:34 pm

Re: Do you think you have a Doubled Die?

Post by JackBnimble01 » Wed Oct 06, 2021 12:11 am

Is this machine doubling on the last 2
And the profile of nose?
The reverse has some kind of gouge by
The leaves… is it worth a further look?
Thanks
Attachments
6C08C4D6-1DF2-4585-B6F1-F1F3720649A5.jpeg
6C08C4D6-1DF2-4585-B6F1-F1F3720649A5.jpeg (380.97 KiB) Viewed 7145 times
FB6A4BBC-4073-4F1C-AD8F-9A936D932055.jpeg
FB6A4BBC-4073-4F1C-AD8F-9A936D932055.jpeg (384.44 KiB) Viewed 7145 times
50574773-5364-4DE3-8043-EF8627CE73E3.jpeg
50574773-5364-4DE3-8043-EF8627CE73E3.jpeg (455.12 KiB) Viewed 7145 times
ACFF7C7E-8E97-421F-A2D4-50A15158980C.jpeg
ACFF7C7E-8E97-421F-A2D4-50A15158980C.jpeg (277.6 KiB) Viewed 7145 times
3231B777-10F8-4E8C-B574-A67F2D7F3D42.jpeg
3231B777-10F8-4E8C-B574-A67F2D7F3D42.jpeg (917.39 KiB) Viewed 7145 times

User avatar
messydesk
Site Admin
Posts: 4101
Joined: Mon May 28, 2018 1:57 am

Re: Do you think you have a Doubled Die?

Post by messydesk » Wed Oct 06, 2021 12:41 am

The machine doubling on the obverse of the Peace dollar gets people all the time, it's that common. The mark on the reverse is a common clash from the top of Liberty's head.
Welcome to the VAMWorld 2.0 discussion boards. R.I.P. old VAMWorld.

James LEE
Posts: 90
Joined: Wed Jul 28, 2021 10:12 pm
Location: Honolulu hawaii

Re: Do you think you have a Doubled Die?

Post by James LEE » Tue Oct 19, 2021 10:24 am

It's been 15 years since I owned this coin and I still don't know, please tell me if it's a DOUBLE DIE or MD, 1969-S It's a very sensitive year, so I really want to know for sure, I'll upload a photo with a lot of magnification and a little bit more. Thank you.
IPC_2021-07-28.00.31.41.6550-1-1.jpg
IPC_2021-07-28.00.31.41.6550-1-1.jpg (50.32 KiB) Viewed 7069 times
20201212_021838-2.jpg
20201212_021838-2.jpg (115.36 KiB) Viewed 7069 times

User avatar
Sumdunce
Posts: 8
Joined: Sat Nov 06, 2021 12:19 am

Re: Do you think you have a Doubled Die?

Post by Sumdunce » Tue Nov 09, 2021 2:13 am

Maybe a few...

1878 7 Tail Feather VAM079:
1878_7TF_079_cotton_leaves.jpg
1878_7TF_079_cotton_leaves.jpg (202.01 KiB) Viewed 6973 times
1888 VAM6:
1888_6_NI_leaves.jpg
1888_6_NI_leaves.jpg (248.51 KiB) Viewed 6973 times
1902O VAM45:
1902O_35_nose.jpg
1902O_35_nose.jpg (171.88 KiB) Viewed 6973 times

keilg1
Posts: 1095
Joined: Fri Feb 08, 2019 4:36 pm
Location: Nottingham, UK

Re: Do you think you have a Doubled Die?

Post by keilg1 » Mon Dec 13, 2021 5:26 pm

Adding my own pesky 1899-O VAM-11. Not an 11A because the cracking isn't as pronounced, but noticed a lot of 'doubling' that looks more like ejection doubling than non-described die doubling. The 1 is doubled, for sure, and a high O, with cracking pattern matching the 11... but noticed many other parts that seemed not quite right - but not all of them look to be equivalent ejection doubling.

First, proving it's a VAM-11:
A074 - 20211213_165335.jpg
A074 - 20211213_165335.jpg (118.42 KiB) Viewed 6723 times
A076 - 20211213_165353.jpg
A076 - 20211213_165353.jpg (145.84 KiB) Viewed 6723 times
A094 - 20211213_171346.jpg
A094 - 20211213_171346.jpg (122.01 KiB) Viewed 6723 times
A079 - 20211213_165516.jpg
A079 - 20211213_165516.jpg (113.16 KiB) Viewed 6723 times

Next post I'll attach a few pictures of different parts showing the machine doubling.

keilg1
Posts: 1095
Joined: Fri Feb 08, 2019 4:36 pm
Location: Nottingham, UK

Re: Do you think you have a Doubled Die?

Post by keilg1 » Mon Dec 13, 2021 5:30 pm

Part 2.

Now the NON-die doubling:
A093 - 20211213_170957.jpg
A093 - 20211213_170957.jpg (104.44 KiB) Viewed 6723 times
A092 - 20211213_170943.jpg
A092 - 20211213_170943.jpg (140.82 KiB) Viewed 6723 times
A091 - 20211213_170923.jpg
A091 - 20211213_170923.jpg (129.67 KiB) Viewed 6723 times

IGWT looks nice, but don't believe this matches the VAM-20 'real' doubling.

Finally, here's an interesting O of OF... again, looks to be a 'real' doubling, but based on everything else, I doubt it.

BTW, nearly all letters on the reverse are doubled, so this is not likely anything but machine doubling but a few letters like this O are rather curious.
Attachments
A089 - 20211213_170424.jpg
A089 - 20211213_170424.jpg (132.69 KiB) Viewed 6723 times

User avatar
vampicker
Posts: 2330
Joined: Fri Jun 01, 2018 1:48 pm
Location: Ohio

Re: Do you think you have a Doubled Die?

Post by vampicker » Mon Dec 13, 2021 11:54 pm

Whatever the cause of the machine doubling, the net result is the same, and tell-tale. Note how the primary image is thinned out with the shelf next to it. The primary and secondary images taken together add up to the normal size of the letters. This is a great example for study
often the crusher of hopes and dreams

blh74
Posts: 745
Joined: Wed May 30, 2018 1:28 am

Re: Do you think you have a Doubled Die?

Post by blh74 » Tue Dec 14, 2021 1:31 am

Best pics I have ever seen!

Melvin_Deal
Posts: 77
Joined: Wed Nov 10, 2021 2:02 am
Location: Laurinburg, NC

Re: Do you think you have a Doubled Die?

Post by Melvin_Deal » Tue Jun 07, 2022 1:38 am

Hi Everybody!

A teaching moment maybe.

I have an '83-S with significant machine doubling on the reverse... especially the North of the coin. The images on this post are of some of this.
Attachments
WIN_20220606_19_43_11_Pro.jpg
WIN_20220606_19_43_11_Pro.jpg (179.34 KiB) Viewed 5043 times
WIN_20220606_19_42_40_Pro.jpg
WIN_20220606_19_42_40_Pro.jpg (157.03 KiB) Viewed 5043 times
WIN_20220606_19_42_05_Pro.jpg
WIN_20220606_19_42_05_Pro.jpg (188 KiB) Viewed 5043 times

Melvin_Deal
Posts: 77
Joined: Wed Nov 10, 2021 2:02 am
Location: Laurinburg, NC

Re: Do you think you have a Doubled Die?

Post by Melvin_Deal » Tue Jun 07, 2022 1:41 am

There is some though that puzzle me though. are these also indeed machine doubling??
Attachments
WIN_20220606_19_45_54_Pro.jpg
WIN_20220606_19_45_54_Pro.jpg (179.46 KiB) Viewed 5043 times
WIN_20220606_19_44_37_Pro.jpg
WIN_20220606_19_44_37_Pro.jpg (182.2 KiB) Viewed 5043 times
WIN_20220606_19_45_19_Pro.jpg
WIN_20220606_19_45_19_Pro.jpg (187.74 KiB) Viewed 5043 times
WIN_20220606_19_44_37_Pro.jpg
WIN_20220606_19_44_37_Pro.jpg (182.2 KiB) Viewed 5043 times

Melvin_Deal
Posts: 77
Joined: Wed Nov 10, 2021 2:02 am
Location: Laurinburg, NC

Re: Do you think you have a Doubled Die?

Post by Melvin_Deal » Tue Jun 07, 2022 1:45 am

There is also a tad of doubling on the obverse that seem to me not to be machine doubling. What is your opinion on these?

FYI... there are no listed examples of Doubled die varieties for this year and mark beyond the date. Attached also is the date on this one just for reference.

Thanks in advance for any help and input!

Sincerely,
-Mel
Attachments
WIN_20220606_19_48_23_Pro.jpg
WIN_20220606_19_48_23_Pro.jpg (182.08 KiB) Viewed 5043 times
WIN_20220606_19_51_09_Pro.jpg
WIN_20220606_19_51_09_Pro.jpg (178.98 KiB) Viewed 5043 times
WIN_20220606_19_52_17_Pro.jpg
WIN_20220606_19_52_17_Pro.jpg (173.63 KiB) Viewed 5043 times

tnytrrs2004
Posts: 19
Joined: Mon Oct 25, 2021 10:54 am

Re: Do you think you have a Doubled Die?

Post by tnytrrs2004 » Mon Jun 13, 2022 9:49 pm

Good after noon messydesk and VAM World,
i am a big Morgan guy but recently i got a hold of a 2022 eagle that i believe is a doubled die or maybe not. what do you think?
Attachments
2022-4.jpg
2022-4.jpg (72.97 KiB) Viewed 4905 times
2022-3.jpg
2022-3.jpg (72.17 KiB) Viewed 4905 times
2022-2.jpg
2022-2.jpg (68.6 KiB) Viewed 4905 times
2022-1.jpg
2022-1.jpg (56.05 KiB) Viewed 4905 times
2022-5.jpg
2022-5.jpg (34.01 KiB) Viewed 4905 times

User avatar
vampicker
Posts: 2330
Joined: Fri Jun 01, 2018 1:48 pm
Location: Ohio

Re: Do you think you have a Doubled Die?

Post by vampicker » Mon Jun 13, 2022 11:11 pm

Strike doubling
often the crusher of hopes and dreams

Dawson09
Posts: 2
Joined: Fri Nov 04, 2022 11:00 am

Re: Do you think you have a Doubled Die?

Post by Dawson09 » Mon Nov 07, 2022 10:48 am

1924 peace dollar MD?
Attachments
20221107_040246.jpg
20221107_040246.jpg (86.92 KiB) Viewed 3606 times
20221107_040328_008.jpg
20221107_040328_008.jpg (56.64 KiB) Viewed 3606 times
20221107_035751.jpg
20221107_035751.jpg (78.07 KiB) Viewed 3606 times

User avatar
messydesk
Site Admin
Posts: 4101
Joined: Mon May 28, 2018 1:57 am

Re: Do you think you have a Doubled Die?

Post by messydesk » Mon Nov 07, 2022 3:54 pm

Yup. Bottoms of IN GOD look smashed by second contact with die.
Welcome to the VAMWorld 2.0 discussion boards. R.I.P. old VAMWorld.

keilg1
Posts: 1095
Joined: Fri Feb 08, 2019 4:36 pm
Location: Nottingham, UK

Re: Do you think you have a Doubled Die?

Post by keilg1 » Sat Dec 03, 2022 5:10 pm

Copying the link to the original post to save server space:
1900-P near 2x date C3 rev - not seeing it described

http://www.vamworld.com/forum/viewtopic.php?f=4&t=7080

As John writes,
The date is punched into the die separately from the hubbing until 1909. Seeing similar doubling on both the date and devices of this coin help confirm that it's machine doubling. This effect isn't always confined to a certain area of the coin. It's a little odd that it's on the mouth and not on the stars, but the appearance of machine doubling all depends on how the coin comes back into contact with the die.

A fabulous lesson for us all!

Spiddle86
Posts: 9
Joined: Tue Dec 13, 2022 4:27 am

Re: Do you think you have a Doubled Die?

Post by Spiddle86 » Tue Dec 13, 2022 6:59 am

Machine or hub doubling on the date on this 1925 P Peace Dollar? The doubled devices appear the correct size when compared to another example w/out doubling of any kind. It’s hard to tell under 10x power but it appears there’s a groove separating the doubling.
Attachments
36535FA1-C83A-43BD-9D94-A35E585A80E4.jpeg
36535FA1-C83A-43BD-9D94-A35E585A80E4.jpeg (228.58 KiB) Viewed 3329 times
8BA556B6-A1CA-4F60-9BA4-09F097E3E3D9.jpeg
8BA556B6-A1CA-4F60-9BA4-09F097E3E3D9.jpeg (282.36 KiB) Viewed 3329 times

User avatar
vampicker
Posts: 2330
Joined: Fri Jun 01, 2018 1:48 pm
Location: Ohio

Re: Do you think you have a Doubled Die?

Post by vampicker » Tue Dec 13, 2022 12:45 pm

That flat sheared off looking shelf along the front edge of the point of the neck is just about a textbook version of strike doubling. The other points on the piece all line up with roughly the same degree and direction. This is a good coin to keep as a reference piece for strike doubling on a Peace Dollar
often the crusher of hopes and dreams

Spiddle86
Posts: 9
Joined: Tue Dec 13, 2022 4:27 am

Re: Do you think you have a Doubled Die?

Post by Spiddle86 » Wed Dec 14, 2022 3:14 am

Thank you!

Post Reply